Lancom Systems 821 Benutzerhandbuch
LANCOM 821 ADSL/ISDN – LANCOM 1621 ADSL/ISDN – LANCOM 1711 VPN
Chapter 10: Appendix
74
EN
10 Appendix
10.1
Performance data and specifications
LANCOM 821
ADSL/ISDN
LANCOM 1621
ADSL/ISDN
LANCOM 1711
VPN
Connections
Ethernet LAN
4x 10/100Base-TX, auto sensing, switch with node/hub auto sensing
All ports can be switched into the ’Private
Mode’, whereby the ports are concealed from
one another.
Mode’, whereby the ports are concealed from
one another.
Individual ports can be
switched into ’Private
Mode’, e.g. as a DMZ
port
switched into ’Private
Mode’, e.g. as a DMZ
port
Cable tester
WAN/ADSL
'Annex A' devices : ADSL over POTS as per ITU
G.992.1 Annex A, ANSI T1.413, ITU G.992.2
(G.Lite), G.994.1 (G.hs);
'Annex B' devices : ADSL over ISDN as per ITU
G.992.1 Annex B, as well as proprietary ADSL
over ISDN (Texas Instruments, ADI, Alcatel),
ETSI TS 101 388
G.992.1 Annex A, ANSI T1.413, ITU G.992.2
(G.Lite), G.994.1 (G.hs);
'Annex B' devices : ADSL over ISDN as per ITU
G.992.1 Annex B, as well as proprietary ADSL
over ISDN (Texas Instruments, ADI, Alcatel),
ETSI TS 101 388
10/100Base-TX, auto
sensing
sensing
DSLoL (DSL over LAN)
LANCOM 821 ADSL/ISDN and LANCOM 1621
ADSL/ISDN can also use a vacant switch port as
a WAN access (DSLoL interface). This can be
used for a subsequent upgrade to an SDSL con-
nection, for example. The DSLoL conector is
connected either to a modem (for PPPoE access
only), or a network terminal router (with static
IP address).
ADSL/ISDN can also use a vacant switch port as
a WAN access (DSLoL interface). This can be
used for a subsequent upgrade to an SDSL con-
nection, for example. The DSLoL conector is
connected either to a modem (for PPPoE access
only), or a network terminal router (with static
IP address).
ISDN
ISDN S0 bus
Outband
serial V.24/V.28 port (8 pol. mini DIN), in combination with LANCOM
modem adapter kit suited for connection of external analogue or GSM
modems
modem adapter kit suited for connection of external analogue or GSM
modems
Stromversorgung
12V over external power adapter
Operating
modes
modes
Multiprotocol router
IP router, IPX router, NAT/reverse NAT (IP masquerading) DHCP server
incl. auto detection, DHCP client, DHCP relay server, DNS server, PPPoE
client, PPTP client, NetBIOS proxy, DynDNS client, N:N mapping
incl. auto detection, DHCP client, DHCP relay server, DNS server, PPPoE
client, PPTP client, NetBIOS proxy, DynDNS client, N:N mapping
ISDN Gateway
RJ-45 ISDN S0 bus, point-to-point and point-to-multipoint configura-
tion, I.430, (autosensing), optional leased-line support; D-channel 1TR6,
DSS1 (Euro-ISDN); B-channel PPP (asynchronous/synchronous), X.75,
HDLC, MLPPP for channel bundling, CAPI 2.0 via LANCAPI, Stac data
compression
tion, I.430, (autosensing), optional leased-line support; D-channel 1TR6,
DSS1 (Euro-ISDN); B-channel PPP (asynchronous/synchronous), X.75,
HDLC, MLPPP for channel bundling, CAPI 2.0 via LANCAPI, Stac data
compression
Protocols
LAN
IP: ARP, Proxy ARP, IP, ICMP, UDP, TCP, TFTP, RIP 1, RIP 2, DHCP, DNS,
SNMP, HTTP, HTTPS, BOOTP, NTP, NetBIOS, LANCAPI
SNMP, HTTP, HTTPS, BOOTP, NTP, NetBIOS, LANCAPI
IPX: RIP, SAP, IPX and SPX watchdogs, NetBIOS watchdogs
WAN
PPPoE, PPPoA, PPTP, IPoA and Plain Ethernet