SonicWALL 4000 Benutzerhandbuch
SonicWALL SSL VPN 4000 Getting Started Guide Page 21
Configuring Your Gateway Device
Now that you have set up your SonicWALL SSL VPN 4000, you need to configure your
gateway device to work with the SonicWALL SSL VPN 4000. Refer to the table in
“Selecting a SonicWALL Recommended Deployment Scenario” on page 4 to determine
the proper scenario for your network configuration.
gateway device to work with the SonicWALL SSL VPN 4000. Refer to the table in
“Selecting a SonicWALL Recommended Deployment Scenario” on page 4 to determine
the proper scenario for your network configuration.
This section contains the following subsections:
•
•
•
•
Scenario A: SSL VPN on a New DMZ
This section provides procedures to configure your gateway appliance based on
Scenario A. This section contains the following subsections:
•
Scenario A. This section contains the following subsections:
•
•
•
•
•
•
•
Scenario A: Connecting to the SonicWALL UTM Appliance
1.
Using a computer connected to your LAN, launch your Web browser and enter the IP
address of your existing SonicWALL UTM appliance in the Location or Address
field.
address of your existing SonicWALL UTM appliance in the Location or Address
field.
2.
When the management interface displays, enter your user name and password in
the appropriate fields and press the Login button.
the appropriate fields and press the Login button.
Note:
Remember that you are logging into your SonicWALL UTM appliance, not the
SonicWALL SSL VPN 4000. Your user name and password combination may be
different from the user name and password you recorded for your
SonicWALL SSL VPN 4000.
different from the user name and password you recorded for your
SonicWALL SSL VPN 4000.