Enterasys Networks 9033900-04 Benutzerhandbuch
Command Groups
A-10
General Commands
.
configure
This command activates Global Configuration mode. You must enter this mode to modify most of
the settings on the access point. You must also enter Global Configuration mode prior to enabling
the context modes for Interface Configuration. See
the settings on the access point. You must also enter Global Configuration mode prior to enabling
the context modes for Interface Configuration. See
Default Setting
None
Command Mode
Exec
Example
Related Commands
Table A-4
General Commands
Command
Function
Mode
Page
configure
Activates global configuration mode
Exec
end
Returns to Exec mode
GC, IC
exit
Returns to the previous configuration mode, or exits
the CLI
the CLI
any
ping
Sends ICMP echo request packets to another node
on the network
on the network
Exec
reset
Restarts the system
Exec
show history
Shows the command history buffer
Exec
show line
Shows the configuration settings for the console port
Exec
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#