Enterasys Networks 9033900-04 Benutzerhandbuch
Command Groups
A-82
radius-server address
This command specifies the primary RADIUS server by IP address or host name.
Syntax
radius-server [secondary] address <host_ip_address | host_name>
• secondary ‐ Secondary server.
• host_ip_address ‐ IP address of server.
• host_name ‐ Host name of server. Range: 1‐20 characters
Default Setting
None
Command Mode
Global Configuration
Example
radius-server key
This command sets the RADIUS encryption key.
Syntax
radius-server [secondary] key <key_string>
• secondary is the secondary server.
• key_string is the encryption key used to authenticate logon access for client. Do not use
blank spaces in the string. Maximum length: 20 characters
Default Setting
DEFAULT
Command Mode
Global Configuration
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#radius-server address 192.168.1.25
RoamAbout 3000(config)#
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#radius-server key green
RoamAbout 3000(config)#