Enterasys Networks 9033900-04 Benutzerhandbuch
Command Groups
RoamAbout Access Point 3000 Configuration Guide
A-81
RADIUS Client Commands
Remote Authentication Dial‐in User Service (RADIUS) is a logon authentication protocol that uses
software running on a central server to control access for RADIUS‐aware devices to the network.
An authentication server contains a database of credentials, such as users names and passwords,
for each wireless client that requires access to the access point. RADIUS client commands are
listed in
software running on a central server to control access for RADIUS‐aware devices to the network.
An authentication server contains a database of credentials, such as users names and passwords,
for each wireless client that requires access to the access point. RADIUS client commands are
listed in
Table A-12
RADIUS Client Commands
Command
Function
Mode
Page
radius-server address
Specifies the RADIUS server
GC
radius-server key
Sets the RADIUS encryption key
GC
radius-server port
Sets the RADIUS server network port
GC
radius-server port-
accounting
Enables or disables the RADIUS server port
for accounting packets and sets the port
number
for accounting packets and sets the port
number
GC
radius-server retransmit
Sets the number of retries
GC
radius-server timeout
Sets the interval between sending
authentication requests
authentication requests
GC
radius-server timeout-
interim
Sets the interval to send accounting updates
from the access point to the server for this
session.
from the access point to the server for this
session.
GC
radius-server secondary
Specifies configuration for the secondary
RADIUS server
RADIUS server
GC
show radius
Shows the current RADIUS settings
Exec