Enterasys Networks 9033900-04 Benutzerhandbuch
Filter Control
RoamAbout Access Point 3000 Configuration Guide
4-19
Using the CLI
CLI Commands for VLAN Support
From the global configuration mode, use the management‐vlanid command to set the default
Management VLAN ID for the Ethernet interface, then enable management VLAN tagging using
the management‐vlan enable command (use no management‐vlan to disable). When you change
the access point’s management VLAN setting, you must reboot the access point to implement the
change. To view the current management VLAN settings, use the show system command.
Management VLAN ID for the Ethernet interface, then enable management VLAN tagging using
the management‐vlan enable command (use no management‐vlan to disable). When you change
the access point’s management VLAN setting, you must reboot the access point to implement the
change. To view the current management VLAN settings, use the show system command.
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#management-vlanid 3
RoamAbout 3000(config)#management-vlan enable
Reboot system now? <y/n>: y
Username: admin
Password:********
RoamAbout 3000#show system
System Information
====================================================================
Serial Number : 034830992141
System Up time : 0 days, 5 hours, 8 minutes, 42 seconds
System Name : RoamAbout AP
System Location
:
System Contact :
System Country Code
: US - UNITED STATES
Ethernet MAC Address : 00-01-F4-61-9C-08
802.11a MAC Address : Default=00-01-F4-61-9C-36 VAP1=00-01-F4-36-3C-36
VAP2=00-01-F4-36-4C-36
VAP3=00-01-F4-36-5C-36
VAP4=00-01-F4-36-6C-36
VAP5=00-01-F4-36-7C-36
VAP6=00-01-F4-36-8C-36
VAP7=00-01-F4-36-9C-36
802.11b/g MAC Address : Default=00-0C-DB-81-3D-CD
VAP1=00-0C-DB-81-3D-CE
VAP2=00-0C-DB-81-3D-CF
VAP3=00-0C-DB-81-3D-D0
VAP4=00-0C-DB-81-3D-D1
VAP5=00-0C-DB-81-3D-D2
VAP6=00-0C-DB-81-3D-D3
VAP7=00-0C-DB-81-3D-D4
IP Address
: 10.2.43.203
Subnet Mask
: 255.255.0.0
Default Gateway
: 10.2.1.1
Management VLAN State : ENABLED
Management VLAN ID(AP : 3
IAPP State
: ENABLED
DHCP Client
: DISABLED
HTTP Server
: ENABLED
HTTP Server Port
: 80
HTTPS Server
: ENABLED
HTTPS Server Port
: 443
Slot Status
: Dual band(a/g)
SSH Server
: ENABLED
SSH Server Port
: 22
Telnet Server
: ENABLED
Com Port
: ENABLED
Software Version
: V3.1.0
====================================================================
RoamAbout 3000#