Enterasys Networks 9033900-04 Benutzerhandbuch

Filter Control

RoamAbout Access Point 3000 Configuration Guide

4-21

CLI Commands for Filtering

Use the filter ibss‐relay command from the global configuration to set the mode for wireless‐to‐
wireless communications through the access point. Use the filter wireless‐ap‐manage command
to restrict management access from wireless clients. Use the iapp or no iapp commands to enable
or disable clients from roaming between access points.

To configure Ethernet protocol filtering, use the filter ethernet‐type filter enable command to
enable filtering and the filter ethernet‐type protocol <protocol> command to define the protocols
that you want to filter. To remove a protocol filter from the table, use the no filter ethernet‐type
protocol <protocol> command. To display the current settings, use the show filters command
from the Exec mode.

RoamAbout 3000#configure

Enter configuration commands, one per line. End with CTRL/Z

RoamAbout 3000(config)#filter wireless-ap-manage

RoamAbout 3000(config)#filter ethernet-type enable

RoamAbout 3000(config)#filter ethernet-type protocol CDP

RoamAbout 3000(config)#exit

RoamAbout 3000#show filters

Protocol Filter Information

===========================================================

IBSS Relay Control :All VAP Mode

802.11a VAP0 :ENABLED

802.11b/g VAP0 :ENABLED

VAP1 :ENABLED

VAP2 :ENABLED VAP2 :ENABLED

VAP3 :ENABLED VAP3 :ENABLED

VAP4

:ENABLED VAP4 :ENABLED

VAP5 :ENABLED VAP5 :ENABLED

VAP6 :ENABLED

VAP7 :ENABLED VAP7 :ENABLED

Wireless AP Management :ENABLED

Ethernet Type Filter :ENABLED

Enabled Protocol Filters

-----------------------------------------------------------

Protocol: CDP ISO: 0x2000

===========================================================

RoamAbout 3000#