Manualsbrain.com
  1. Handbücher
  2. Marken
  3. GarrettCom
  4. DX40
  5. Benutzerhandbuch

GarrettCom DX40 Benutzerhandbuch

Download
Seite von 34
C
HAPTER
1 - Overview
Specifications
DX40 Serial Device Router Installation Guide
6
1.3.6
Ports and External Connectors
The ports and external connectors of the DX40 are defined in 
1.3.7
Indicators
The status indicators of the DX40 are described in 
. The operational status of 
the ports of the DX40 is indicated by a bank of LEDs on the beveled corner of the chassis, 
visible from the front and the side, as illustrated in 
Figure 1-3
.
Table 1-6. Ports and External Connectors
Port Name
Connector
Description
Ethernet, E1 and E2
LC
or
LC + RJ45
2 100FX multi/single mode small-format pluggables 
(SFP) port for fiber optic Ethernet-capable devices or 
Networks, or one 100FX SFP port and one 10/100 
Mbps Ethernet port for connection to copper 
Ethernet-capable devices.
Serial, S1 and S2
DB9, female
Connection to serial async devices. Configurable to 
300, 600,1200, 2400, 4800, 9600, and 19.2, 28.8, 
33.6, 38.4, 57.6, 115.2, 230.4 Kbps.
Power Connection
Terminal block
Non-polarized power input.
Facility Ground Point
Screw
Facility ground connection point.
8
NOTE: All copper I/O connections must be made with shielded cables and
connectors.
Table 1-7. Indicators
LED Name
Condition
Indication
S1 – S2
(Serial Ports)
Green
Port is connected to an active serial device.
Off
Port is down.
Flashing
Data is passing through the port.
E1 – E2
(Ethernet Ports)
Green
Port is connected to an active Ethernet device.
Off
Port is down.
Flashing
Data is passing through the port.
Power
Green
Normal functioning.
Off
Power not connected.
Yellow
Power on but diagnostics not yet run or 
diagnostics failed.
Alternating Yellow 
and Green
Diagnostics in progress.