Huawei DR814Q Benutzerhandbuch

User Manual 
Aolynk DR814Q ADSL2+ Broadband Router 

5  Advanced Configuration

 

47 

Table 5-4 Description of trigger setting items 

Transport Type 

Transport type of the trigger port. From the drop-down list, 
select a transport type (TCP or UDP) to which the newly added 
trigger is specified. 

Port Range 

Port range of the trigger port. (1 – 65535) 

Triggered Port 
Range 

Port range of the triggered port. (1024 – 65535) 

 

The NAT technology can translate the internal private address of a PC in the LAN into a 

valid public IP address, and thus the PC can communicate with the WAN. Click the 

[NAT] tab of the security setup page to enter the corresponding page shown in Figure 

 

Figure 5-11 NAT settings 

Before configure NAT, select a service interface from the [IP Interface] drop-down list so 

that NAT and static NAT run on this interface. 

Select the Enable/Disable option behind “NAT” to enable/disable NAT. 

The [Static NAT] section is used to configure NAT conversion items. Public IP 

addresses correspond to private IP addresses in a one-by-one way.