Polycom 4300T Benutzerhandbuch

2 - 1

Getting Started

The 4300T is designed for desktop, rack or wall-mount installation.  Please 

observe the following guidelines when installing the system:

• Never assume that the AC cord is disconnected from a power source.  

Always check first.

• Always connect the AC power cord to a properly grounded AC outlet to 

avoid damage to the system or injury.

Ensure that the physical location of the installation has adequate air circulation 

and meets the minimum operating conditions as provided in the 

environmental specifications for the system. 

Remove the 4300T and accessories from the shipping container.

Place the 4300T on a flat, dry surface such as a desktop, shelf or tray.

Connect the power and network cables to the appropriate ports on the 

back of the system.

The 4300T can be wall-mounted using the two mounting brackets on the 

bottom of the appliance.  We recommend using two round or pan head screws.

Secure the power supply using a fastener or nearby shelf so that it does not hang 
from the power connector.

To reduce the risk of fire, use only 26 AWG or larger wire (e.g. 24, 22, 20, etc.) to 
connect the T1 port on your unit to an RJ-45 jack.