Polycom 4300T Benutzerhandbuch

User Guide V

2

IU 4300T Converged Network Appliance

2 - 2

Install two screws 4 14/16

” 

horizontally apart on a wall or other vertical 

surface.  The screws should protrude from the wall so that you can fit the 

appliance between the head of the screw and the wall.

If you install the screws in drywall use hollow wall anchors to ensure that 

the unit does not pull from the wall due to prolonged strain from the 

cable and power connectors.

Remove the 4300T and accessories from the shipping container.

Hang the 4300T on the wall.

Connect the power and network cables to the appropriate ports on the 

back of the system.

The 4300T is configured using a web browser such as Internet Explorer or 

Netscape Navigator.  The 4300T is shipped with a pre-configured IP address 

for its LAN port of 192.168.1.1. To connect to the 4300T, do the following:

Connect a PC using an IP address of 192.168.1.2 and subnet mask of 

255.255.255.0 to LAN port 4 of the 4300T.

Launch a web browser on the PC and enter the URL string: 192.168.1.1.  
Press Return.  The initial 4300T main configuration menu appears.

Select the Network link - enter the username root and the password 

default to log into the system.

Secure the power supply using a fastener or nearby shelf so that it does not hang 
from the power connector.

To reduce the risk of fire, use only 26 AWG or larger wire (e.g. 24, 22, 20, etc.) to 
connect the T1 port on your unit to an RJ-45 jack.