Proxim AP-2000 Benutzerhandbuch

14

In 1997, the Institute of Electrical and Electronics Engineers (IEEE) adopted the 802.11 standard for wireless devices 
operating in the 2.4 GHz frequency band. This standard includes provisions for three radio technologies: direct 
sequence spread spectrum, frequency hopping spread spectrum, and infrared. Devices that comply with the 802.11 
standard operate at a data rate of either 1 or 2 Megabits per second (Mbits/sec). 
In 1999, the IEEE modified the 802.11 standard to support direct sequence devices that can operate at speeds of up to 
11 Mbits/sec. The IEEE ratified this standard as 802.11b. 802.11b devices are backwards compatible with 2.4 GHz 
802.11 direct sequence devices (that operate at 1 or 2 Mbits/sec). Available Frequency Channels vary by regulatory 
domain and/or country. See 

 for details.

Also in 1999, the IEEE modified the 802.11 standard to support devices operating in the 5 GHz frequency band. This 
standard is referred to as 802.11a. 802.11a devices are not compatible with 2.4 GHz 802.11 or 802.11b devices. 
802.11a radios use a radio technology called Orthogonal Frequency Division Multiplexing (OFDM) to achieve data 
rates of up to 54 Mbits/sec. Available Frequency Channels vary by regulatory domain and/or country. See 

 for details. 

In 2003, the IEEE introduced the 802.11g standard. 802.11g devices operate in the 2.4 GHz frequency band using 
OFDM to achieve data rates of up to 54 Mbits/sec. In addition, 802.11g devices are backwards compatible with 
802.11b devices. Available Frequency Channels vary by regulatory domain and/or country. See 

 for details.

There are several management and monitoring interfaces available to the network administrator to configure and 
manage an AP on the network:

•

•

•

The HTTP Interface (Web browser Interface) provides easy access to configuration settings and network statistics 
from any computer on the network. You can access the HTTP Interface over your LAN (switch, hub, etc.), over the 
Internet, or with a “crossover” Ethernet cable connected directly to your computer’s Ethernet Port.
HTTPS provides an HTTP connection over a Secure Socket Layer. HTTPS is one of two available secure 
management options on the AP; the other secure management option is SNMPv3. Enabling HTTPS allows the user to 
access the AP in a secure fashion using Secure Socket Layer (SSL) over port 443. The AP supports SSLv3 with a 
128-bit encryption certificate maintained by the AP for secure communications between the AP and the HTTP client. 
All communications are encrypted using the server and the client-side certificate.
The AP comes pre-installed with all required SSL files: default certificate, private key and SSL Certificate Passphrase 
installed. 

The Command Line Interface (CLI) is a text-based configuration utility that supports a set of keyboard commands and 
parameters to configure and manage an AP.
Users enter Command Statements, composed of CLI Commands and their associated parameters. Statements may 
be issued from the keyboard for real time control, or from scripts that automate configuration.
For example, when downloading a file, administrators enter the download CLI Command along with IP Address, file 
name, and file type parameters.
You access the CLI over a HyperTerminal serial connection or via Telnet. During initial configuration, you can use the 
CLI over a serial port connection to configure an Access Point’s IP address. When accessing the CLI via Telnet, you 
can communicate with the Access Point from over your LAN (switch, hub, etc.), from over the Internet, or with a 
“crossover” Ethernet cable connected directly to your computer’s Ethernet Port.
See 

 for more information on the CLI and for a list of CLI commands and 

parameters.