TP-LINK TL-WR841HP Merkblatt

300Mbps High Power Router

7106504243    REV1.0.0

QIG

300Mbps High Power Router

Resource CD

Insert the TP-LINK Resource CD into the CD-ROM drive.

After confirming the hardware connection and the status 
of LEDs, please click NEXT to continue.

After the connectivity is checked successfully, please click 

NEXT.

Select the connection type your ISP provides and click NEXT. 
Here we take Dynamic IP for example.

You can rename your wireless network on this page. 
The default wireless name is TP-LINK_XXXXXX.  Click 

NEXT to continue.

You are recommended to select Most Security 

(WPA2-PSK) to secure your wireless network. 

If you are utilizing a cable modem to access the Internet, 
you may need to clone your MAC address.

Ethernet Cable

TL-WR841HP

Power Adapter

If you are using a MAC/Linux or a windows computer without a CD drive to run the mini CD, please refer to Appendix 1 for configuration.

Connect the  INTERNET port on your router to the modem’s LAN  port with an Ethernet cable.
Connect your computer to one of the ETHERNET ports labeled 1~4 on the router with an Ethernet cable.

Plug the provided power adapter into the POWER jack on the back of the router and the other end to a standard electrical wall socket.

Power off your modem.

Power on the modem and wait for one minute .

The default wireless 

password, the same 

as the PIN code, is 

printed on the label 

at the bottom of the 

Router.  

The Router is 

pre-encrypted. 

Cable/DSL Modem

Wall Socket

Internet

Wall Socket

WPS/

RESET

1

2

3

4

POWER

INTERNET

WPS/

RESET

1

2

3

4

POWER

INTERNET

Select TL-WR841HP and click Easy Setup Assistant.