ZyXEL Communications G-1000 Benutzerhandbuch
G-1000 User’s Guide
80
Chapter 8 Remote Management Screens
Set Community
Enter the Set community, which is the password for incoming Set requests
from the management station. The default is public and allows all requests.
Trap
Community
Type the trap community, which is the password sent with each trap to the
SNMP manager. The default is public and allows all requests.
Destination
Type the IP address of the station to send your SNMP traps to.
SNMP
Service Port
You may change the server port number for a service, if needed; however, you
must use the same port number in order to use that service for remote
management.
Service Access
Select the interface(s) through which a computer may access the G-1000 using
this service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
G-1000 using this service.
Select All to allow any computer to access the G-1000 using this service.
Choose Selected to just allow the computer with the IP address that you specify
Select All to allow any computer to access the G-1000 using this service.
Choose Selected to just allow the computer with the IP address that you specify
to access the G-1000 using this service.
Apply
Click Apply to save your customized settings and exit this screen.
Reset
Click Reset to begin configuring this screen afresh.
Table 30 Remote Management: SNMP
LABEL
DESCRIPTION