ZyXEL Communications G-1000 ユーザーズマニュアル

G-1000 User’s Guide

80

Chapter 8 Remote Management Screens

Set Community

Enter the Set community, which is the password for incoming Set requests 

from the management station. The default is public and allows all requests.

Trap

Community

Type the trap community, which is the password sent with each trap to the 

SNMP manager. The default is public and allows all requests.

Destination

Type the IP address of the station to send your SNMP traps to.

SNMP

Service Port

You may change the server port number for a service, if needed; however, you 

must use the same port number in order to use that service for remote 

management.

Service Access

Select the interface(s) through which a computer may access the G-1000 using 

this service.

Secured Client IP 

Address

A secured client is a “trusted” computer that is allowed to communicate with the 

G-1000 using this service. 
Select All to allow any computer to access the G-1000 using this service.
Choose Selected to just allow the computer with the IP address that you specify 

to access the G-1000 using this service.

Apply

Click Apply to save your customized settings and exit this screen. 

Reset

Click Reset to begin configuring this screen afresh.

Table 30   Remote Management: SNMP