Technicolor - Thomson 545/570 Benutzerhandbuch
4 Wireless Connectivity
E-DOC-CTC-20030814-0001 v1.0
46
Registering wireless
clients
In case registration is enabled, you must register pending wireless network clients as
follows:
follows:
1
Make sure the wireless client is correctly associated to the SpeedTouch™ WLAN.
Depending on your WLAN client adapter a wireless icon may become green or a
message similar to the following may appear: “Successfully joined Wireless net-
work SpeedTouch012345".
Depending on your WLAN client adapter a wireless icon may become green or a
message similar to the following may appear: “Successfully joined Wireless net-
work SpeedTouch012345".
Note
Some WLAN clients do not automatically join a WLAN. If so, follow
the instructions for the WLAN client software to initiate the associa-
tion.
the instructions for the WLAN client software to initiate the associa-
tion.
2
Push the red Registration button on the SpeedTouch™ back panel or click Register
on the SpeedTouch™ Wireless web page (see
on the SpeedTouch™ Wireless web page (see
for more
information).
The SpeedTouch™ will now add the wireless client to the Access Control List and
save the current configuration.
The SpeedTouch™ will now add the wireless client to the Access Control List and
save the current configuration.
Note
You can only register one wireless client at a time. So you have to push
the registration button for each client you want to add.
the registration button for each client you want to add.
3
Browse to the SpeedTouch™ Wireless web page to see that the MAC address of
your wireless client is added to the Access Control List.
your wireless client is added to the Access Control List.
Note
If a system password secures the SpeedTouch™ from unauthorized
access, you'll need to authenticate first before you can actually browse
its web pages.
access, you'll need to authenticate first before you can actually browse
its web pages.