Technicolor - Thomson 545/570 Benutzerhandbuch
4 Wireless Connectivity
E-DOC-CTC-20030814-0001 v1.0
45
4.2 Connecting Wireless Clients
Before you connect
other wireless clients
In case the SpeedTouch™ has not been configured before (the SpeedTouch™ is still in
its default configuration), it is recommended to proceed first with the configuration
setup procedures as described in
its default configuration), it is recommended to proceed first with the configuration
setup procedures as described in
For enhanced security, after going through the SpeedTouch™ configuration setup
procedures, you are able to “personalize” the SpeedTouch™ wireless access point
settings by configuring another SSID, and/or optionally another security level.
For more information on the configuration of the SpeedTouch™ Wireless configura-
tion, see
procedures, you are able to “personalize” the SpeedTouch™ wireless access point
settings by configuring another SSID, and/or optionally another security level.
For more information on the configuration of the SpeedTouch™ Wireless configura-
tion, see
Preconditions
Make sure that:
•
The SpeedTouch™ is powered on and ready for service.
•
The SpeedTouch™ has been configured by the SpeedTouch™ Setup wizard or via
uploading the appropriate configuration profile file.
uploading the appropriate configuration profile file.
•
Optionally, the SpeedTouch™ wireless settings have been personalized.
Further make sure that:
•
The wireless client adapters are installed on the computers you want to connect.
Depending on the personalized wireless settings:
•
In case WEP encryption is enabled on the SpeedTouch™, you must configure the
wireless client to use the same encryption level and WEP key.
wireless client to use the same encryption level and WEP key.
•
In case SSID broadcasting is disabled, you must configure the wireless client for
the SpeedTouch™ SSID.
the SpeedTouch™ SSID.
•
Depending on the registration button and Access Control List configuration:
•
In case registration is disabled and the Access Control List unlocked, no
further actions are needed for the wireless client to access the Speed-
Touch™ WLAN.
further actions are needed for the wireless client to access the Speed-
Touch™ WLAN.
•
In case registration is disabled and the Access Control List locked, you must
manually add the wireless client to the Access Control List as described in
manually add the wireless client to the Access Control List as described in
. Make sure to save your SpeedTouch™ configuration
by clicking
•
In case registration is enabled and the Access Control List locked, you must
follow the procedure below to register the WLAN client to the Speed-
Touch™ Access Control List.
follow the procedure below to register the WLAN client to the Speed-
Touch™ Access Control List.