Benq MX620ST Benutzerhandbuch

Operation

22

Securing the projector

Using a security cable lock

The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a 

lock, such as the Kensington lock, to secure the projector. You can locate a Kensington 

lock slot on the rear side of the projector. See item 22 on page 

 for details.

A Kensington security cable lock is usually a combination of key(s) and the lock. Refer to 

the lock’s documentation for finding out how to use it.

Utilizing the password function

For security purposes and to help prevent unauthorized use, the projector includes an 

option for setting up password security. The password can be set through the On-Screen 

Display (OSD) menu.

WARNING: You will be inconvenienced if you activate the password functionality and subsequently forget the 

password. Print out this manual (if necessary) and write the password you used in this manual, and keep the 

manual in a safe place for later recall.

Setting a password

Once a password has been set and the power on lock is activated, the projector cannot be used unless the 

correct password is entered every time the projector is started.

1.

Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security 
Settings menu. Press MODE/ENTER. The Security Settings page appears.

2.

Highlight Change Security Settings and press MODE/ENTER.

3.

As pictured to the right, the four arrow keys 
( , 

,  ,  ) respectively represent 4 digits 

(1, 2, 3, 4). According to the password you 
desire to set, press the arrow keys to enter six 
digits for the password.

4.

Confirm the new password by re-entering the 
new password.
Once the password is set, the OSD menu 
returns to the Security Settings page.

5.

To activate the Power On Lock function, press  /  to highlight Power On Lock 
and press  /

 to select On.

6.

To activate the Web Control Lock function, press  /  to highlight Web 
Control Lock and press  /

 to select On. When the Web Control Lock 

function is activated, you have to enter the correct password to change projector 
settings via the Projector Network Display System.

IMPORTANT: The digits being input will display as asterisks on-screen. Write your selected password down 

here in this manual in advance or right after the password is entered so that it is available to you should you 

ever forget it.
Password: __ __ __ __ __ __
Keep this manual in a safe place.

7.

To leave the OSD menu, press MENU/EXIT.