Ricoh PJ WX3131 Benutzerhandbuch

3

Read the owner’s manual of the device you are connecting to the projector.

Some computers cannot be used with or connected to this projector.

Check for an RGB output terminal, supported signal 

Turn off the power of both devices before connecting.

The figure below shows sample connections. This does not mean that all of these devices 

can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)

When COMPUTER  IN terminal is used as MONITOR OUT terminal, the signal which is 
input to COMPUTER 1 IN terminal is output.
Signals are output from MONITOR OUT terminal even in standby mode. 
However, from AUDIO OUT terminal, no audio signal is output.
A computer monitor cannot accept Y/P

B

/P

R

 signals correctly.

The AUDIO IN terminal can be used for devices connected to COMPUTER 1 terminal, 
COMPUTER  terminal, VIDEO terminal and S-VIDEO terminal.
When an AUDIO OUT terminal is connected, sound is not output from the projector speaker.
Output volume of AUDIO OUT terminal can be adjusted by the 

VOL button.

•

•

•

•

•

•

•
•

•
•

To audio 
output

Audio cable (not supplied)

Conversion adapter  

BNC-pin (not supplied)

To Y/C

B

/CR output  

Green(Y)/Blue(C

B

)/ 

Red (C

R

)

RGB cable  

(supplied)

Video cable  

(not supplied)

Audio cable  

(not supplied)

To audio 
output
White (L)/ 
Red (R)

To RS-3C  
terminal 

Audio cable  
(not supplied)

Video recorder, 

DVD player, etc.

Computer

To 
video 
output

DVD video recorder, etc.

Audio cable  

(not supplied)

Monitor cable Mini  

D-sub 15P-BNC  

(not supplied)

To audio 

output  

White (L)/ 

Red (R)

To RGB output

Computer (for control)

To 
S-video 
output

To audio input  
White (L)/Red ( R)

Audio amplifier, etc.

It is necessary to  
switch to MONITOR
OUT by the  
switch. 

S-video cable  
(not supplied)

Control 
cable (not 
supplied)

*  The connection for COMPUTER 1 IN terminal described here is also applicable for COMPUTER  IN terminal.

Monitor