Ricoh PJ WX3131 Benutzerhandbuch

5

When the setting of beep sound is [

On], the projector beeps, and a message appears 

on the screen, confirming that you wish to shut off the power. To shut off the power, 
press the ON/STANDBY button again. If you do not wish to shut off the power, wait for a 
while without conducting any operations. This message will disappear after a moment. 
(This operation is no longer valid after the message disappears.)

When the setting of beep sound is [

On], the projector 

beeps, and the screen disappears, but the internal 

cooling fan continues to operate. Then, the projector 

goes into standby mode.

During cooling, the ON/STANDBY indicator flashes. 

While the indicator is flashing, the power can not be 

turned back on. There is no problem with unplugging 

the power cord in this state.

After use, replace the lens cap.

The projector consumes about 4.5W of power in standby. We recommend that you 
unplug the power cord if you will not be using the projector for an extended period.

When you wish to restart the projector again right after turning off the power, give the 
lamp time (about 5 minutes) to cool before plugging it back in. If the lamp overheats, it 
may fail to light.
Right after turning off the power, the unit may become very hot, especially air exhaust, 
lamp cover or the bottom of the unit. Please handle with care to avoid burn injuries.



•

•

•