Infocus IN3116 Benutzerhandbuch
10
Displaying an image
Touch the Power button on the keypad or the remote.
The Power button blinks green and the fans start to run. When the lamp turns on, the
start up screen will display and the Power button will become solid green. It can
take a minute for the image to achieve full brightness.
start up screen will display and the Power button will become solid green. It can
take a minute for the image to achieve full brightness.
No start up screen? Get help on page 15.
Slide the lens cover to the side, if it is covering the lens.
Turn on your computer or video device.
The image should appear on the projection screen. If it doesn’t, press the Source
button on the projector’s keypad or remote.
button on the projector’s keypad or remote.
If you are using a VGA cable to connect your computer to the projector
(instead of DisplayLink):
(instead of DisplayLink):
If using a laptop, make sure its external video port is active.
Many laptops do not automatically turn on their external video port when a projec-
tor is connected. Usually a key combination like Fn + F8 or CRT/LCD key turns the
external display on and off. Locate a function key labeled CRT/LCD or a function
key with a monitor symbol. Press Fn and the labeled function key simultaneously.
Refer to your laptop’s documentation for more information about your laptop’s key
combination or go to the InFocus website at: http://www.infocus.com/Support/
LaptopActivation.aspx.
tor is connected. Usually a key combination like Fn + F8 or CRT/LCD key turns the
external display on and off. Locate a function key labeled CRT/LCD or a function
key with a monitor symbol. Press Fn and the labeled function key simultaneously.
Refer to your laptop’s documentation for more information about your laptop’s key
combination or go to the InFocus website at: http://www.infocus.com/Support/
LaptopActivation.aspx.
No laptop image? Try pressing the Auto Image button on the keypad.
Is your laptop connected to the projector's DisplayLink connector? See
the InFocus DisplayLink Software User's Guide (available on the InFocus
website at www.infocus.com/displaylink) for troubleshooting information.
the InFocus DisplayLink Software User's Guide (available on the InFocus
website at www.infocus.com/displaylink) for troubleshooting information.
Press Power button
Turn on computer or
video device
video device
Activate laptop’s external port
Monitor key or
LCD/CRT key
LCD/CRT key
Fn key