Infocus IN3116 Benutzerhandbuch

Connect the black power cord to the Power connector on the rear of the projector 
and to your electrical outlet. The Power light on the Status Indicator Panel (page 14) 
turns amber.

NOTE: Always use the power cord that shipped with the projector.

If you have a Windows or Macintosh computer, connect the USB cable between 
your computer's USB port and the projector's DisplayLink connector*. Then to 
begin installation of the DisplayLink software: 

Windows: Follow the instructions on the screen.

Macintosh: A folder will open containing a file named DisplayLink Installer.pkg. 
Open that file and follow the instructions on the screen.

*For detailed DisplayLink instructions and troubleshooting, and to download the 
latest DisplayLink software, go to www.infocus.com/support/displaylink.

Connect one end of the provided computer cable to the VGA 1 or VGA 2 connector 
on the projector and the other to the VGA connector on your computer. If you are 
using a desktop computer, you will need to disconnect the monitor cable from the 
computer’s video port first (you can connect this monitor cable to the Monitor Out 
connector on the projector, see next page).

HDMI is a standard, uncompressed, all-digital audio/video interface. HDMI 
provides an interface between sources, such as set-top boxes, DVD players, and 
receivers and your projector. Plug an HDMI cable into the video out connector on 
the video device and into the HDMI connector on the projector.

To take advantage of HDMI 1.3 Deep Color (30 bit) you must have a 1.3-
compatible source.

Connect power cord

Connect USB cable

Connect computer cable