Infocus IN2116 Benutzerhandbuch

Touch the Power button on the keypad or the remote.

The Power button blinks green and the fans start to run. When the lamp turns on, the 
start up screen will display and the Power button will become solid green. It can 
take a minute for the image to achieve full brightness.

No start up screen? Get help on page 15.

Slide the lens cover to the side, if it is covering the lens.

Turn on your computer or video device.

The image should appear on the projection screen. If it doesn’t, press the Source 
button on the projector’s keypad or remote.

If using a laptop, make sure its external video port is active.

Many laptops do not automatically turn on their external video port when a projec-
tor is connected. Usually a key combination like Fn + F8 or CRT/LCD key turns the 
external display on and off. Locate a function key labeled CRT/LCD or a function 
key with a monitor symbol. Press Fn and the labeled function key simultaneously. 
Refer to your laptop’s documentation for more information about your laptop’s key 
combination or go to the InFocus website at: http://www.infocus.com/Support/
LaptopActivation.aspx. 

No laptop image? Try pressing the Auto Image button on the keypad.

Press Power button

Turn on computer or 
video device

Activate laptop’s external port

Monitor key or 
LCD/CRT key

Fn key