Infocus IN2116 Benutzerhandbuch

If necessary, adjust the height of the projector by pressing the elevator foot release 
button to extend the foot.

Rotate the elevator feet for granular adjustment of the projector’s height. Avoid 
placing your hands near the hot exhaust vent at the side of the projector. 

Avoid placing your hands near the hot exhaust vent at the side of the projector.

Position the projector to the desired distance from the screen at a 90 degree angle to 
the screen. See page 6 for a table listing to screen sizes and distances.

Adjust the zoom or focus. 

If the image is not square, first make sure that the projector is perpendicular to the 
screen. To reduce the size of the top edge of the image, press the top Keystone 
button. To reduce the size of the bottom edge of the image, press the bottom 
Keystone button.

If the left or right side of the screen is larger or smaller than the other, you can turn 
the projector to the left or to the right a few degrees to square the image. See page 6 
for details.

Adjust the Contrast or Brightness in the Basic Picture menu. See page 27 for help 
with these menu adjustments.

Adjust height

Adjust distance

Adjust zoom and focus

Adjust keystone