Infocus IN100 Benutzerhandbuch
Maintenance
48
5.
Pull out the lamp connector from a
slot in the lamp compartment.
Disconnect it from the projector as
illustrated.
slot in the lamp compartment.
Disconnect it from the projector as
illustrated.
6.
Lift the handle so that it stands up.
Use the handle to slowly pull the
lamp out of the projector.
Use the handle to slowly pull the
lamp out of the projector.
CAUTION
•
Pulling it too quickly may cause the lamp
to break and scatter broken glass in the
projector.
to break and scatter broken glass in the
projector.
•
Do not place the lamp in locations where
water might splash on it, children can
reach it, or near flammable materials.
water might splash on it, children can
reach it, or near flammable materials.
•
Do not insert your hands into the projector
after the lamp is removed. If you touch the
optical components inside, it could cause
color unevenness and distortion of the
projected images.
after the lamp is removed. If you touch the
optical components inside, it could cause
color unevenness and distortion of the
projected images.
7.
Insert the new lamp into the
lamp compartment and
make sure it fits in the
projector.
lamp compartment and
make sure it fits in the
projector.
8.
Reconnect the lamp
connector and place it back
into its slot to be flush with
the projector.
connector and place it back
into its slot to be flush with
the projector.
1
2
2