Toshiba B-492L Benutzerhandbuch

EO1-33032 

2.8 Loading the Ribbon

2-11 

 

 

  Grasp the tabs on the top and bottom of the ribbon stoppers and move 

the ribbon stoppers back to the end of the shaft. 

 Leaving plenty of slack between the ribbon spools, place the ribbon 

onto the ribbon shafts as shown below.  When the ribbon is fitted, it 
must be positioned in the ribbon sensor.

 

 
 
 
 
 
 
 

 

1.  Do not touch any moving 

parts.  To reduce the risk 
of fingers, jewellery, 
clothing, etc. being 
drawn into the moving 
parts, be sure to load the 
ribbon once the printer 
has stopped moving 
completely. 

2.  To avoid injury, be 

careful not to trap your 
fingers while opening or 
closing the cover.  

3.  Be sure to open the top 

cover fully, otherwise the 
top cover may close, 
causing injury.  

Ribbon Stopper 

 

Ribbon 

Ribbon Shafts 

 

Ribbon Sensor