Toshiba B-492L Benutzerhandbuch
2. PRINTER SETUP
EO1-33032
2.10 Test Print
2-13
2.9 Inserting the
Optional PCMCIA
Cards (Cont.)
Cards (Cont.)
2.10 Test Print
3.
The following PCMCIA cards can be used.
Type Maker Description
Remarks
ATA Card
San Disk
Hitachi
A card conforming to
the PC card ATA
standard
the PC card ATA
standard
----------
Ether Link III 3C589D
PC card
PC card
LAN Card
3 COM
Megahertz®
10M bps LAN PC Card
3CCE589ET Series
10M bps LAN PC Card
3CCE589ET Series
Install into the slot (1)
only. (This card
installed into the slot
(0) will not work.)
only. (This card
installed into the slot
(0) will not work.)
Maxell
EF-1M-TB AA
Mitsubishi MF-81M1-GBDAT01
Capacity: 1MB
Read only
Read only
EF-4M-TB CC
Maxell
EF-4M-TB DC
Capacity: 4MB
Readable/writable
Readable/writable
Centennial
Technologies
INC.
FL04M-15-11119-03
INTEL IMC004FLSA
Simple
TECHNOLOGY
STI-FL/4A
Mitsubishi MF84M1-G7DAT01
PC Card KING
MAX
FJN-004M6R
Flash Memory
Card
PC Card
FJP-004M6R
Capacity: 4MB
Read only
Read only
A print test should be performed to check that the printer is operating
correctly. During this test, the printer will first issue a blank page of
media to allow the sensors to detect the Black Mark or Label Gap. Then it
will print five pages of slanted lines followed by five pages of sample bar
codes then finally by printing five pages that contain characters of various
sizes.
For the test print procedure, please refer to Appendix 4.6 Test Print.
correctly. During this test, the printer will first issue a blank page of
media to allow the sensors to detect the Black Mark or Label Gap. Then it
will print five pages of slanted lines followed by five pages of sample bar
codes then finally by printing five pages that contain characters of various
sizes.
For the test print procedure, please refer to Appendix 4.6 Test Print.