Xerox Phaser 3260DNI Benutzerhandbuch

Common Problems

Xerox

®

 Phaser

®

 3052/3260

User Guide

144

Wrinkles or creases

• Ensure that the paper is loaded properly.
• Check the paper type and quality. (See 

Media Guidelines

.)

• Turn the stack of paper over in the tray. Also try rotating the paper 180 degrees in 

the tray.

Back of printouts 
are dirty

Check for leaking toner. Clean the inside of the machine. (See 

Cleaning the Machine

.)

Solid Black pages

• The toner cartridge may not be installed properly. Remove the cartridge and reinsert 

it.

• The toner cartridge may be defective. Remove the toner cartridge and install a new 

one. (See 

Replacing the Toner Cartridge

.)

• The machine may require repair. Contact a service representative.

Loose toner

• Clean the inside of the machine. (See 

Cleaning the Machine

.)

• Check the paper type and quality. (See 

Media Guidelines

.)

• Remove the toner cartridge and install a new one. (See 

Replacing the Toner 

Cartridge

.)

• The machine may require repair. Contact a service representative.

Character Voids

Character voids are white areas within parts of characters that should be solid black:
• If you are using transparencies, try another type of transparency. Because of the 

composition of transparencies, some character voids are normal. 

• You may be printing on the wrong surface of the paper. Remove the paper and turn 

it around. 

• The paper may not meet paper specifications. (See 

Media Specifications

.)