Citizen Systems 500 Benutzerhandbuch

19

This printer contains resident pitches which are accessible through the Control Panel.  You can
select any one of the character pitches by pressing the PITCH button on the Control Panel.

Each time the PITCH button is pressed, the printer will select the
next available font size from the list.

The combination of PITCH indicators lights shows the
current character size selected, as shown on the
Control Panel.

When the HIGH SPEED DRAFT function is enabled (using the button to the left of the control
panel), only Program, 10 cpi and 12 cpi fonts can be selected.

You must be in PROGRAM (both PITCH indicators are off) to allow your software to control your
font size.  If any one of the pitch lights are lit, then the printer will remain locked in this size of
character printing.

This printer contains the built-in High Speed Draft font which are accessible through the Control
Panel by pressing the HI-SPEED DRAFT button.

Each time the button is pressed, it will enable or disable the high speed draft mode.  If the
indicator is lit, the printer is running at the higher speed.

Please note that when enabled, this feature will lower the print density.

This information is
printed on the con-
trol panel and is for
reference only

The two indicator lights
illuminate or blink ac-
cording to the settings of
the printer