Panasonic KX-MC6020 Benutzerhandbuch

Seite von 120
2. Preparation
24
For assistance, please visit http://www.panasonic.com/help
For the default gateway:
1. Press {5}{0}{3} to display 
DEFAULT 
GATEWAY”.
2. {Set} i Enter the default gateway of the 
network. i {Set}
5
Press {Menu} to exit.
6
Install Multi-Function Station on the computer that 
you want to use it with. See page 24 for details.
To correct a mistake in the IP address, subnet mask, 
or default gateway
Press {<} or {>} to move the cursor to the incorrect 
number, and make the correction.
2.11.3 Setting the computer for PC fax 
reception
You need to select the computer that will be used for 
receiving faxes.
L
Make sure PC fax setting is turned ON beforehand 
(feature #442 on page 63).
1
{
Menu} i {#}{4}{4}{3} i {Set}
2
Press {V} or {^} repeatedly to select the desired 
computer. i {Set}
3
Press {Menu} to exit.
Note:
L
If the unit is not connected to the LAN, the computer 
connected to the unit by USB is assigned as the 
default computer for PC fax reception.
L
To select the desired computer easily, change the PC 
name beforehand (page 27).
2.12 Installing Multi-Function 
Station
2.12.1 Required computer environment
Panasonic Multi-Function Station software enables the 
unit to carry out the following functions:
Printing on plain paper, thin and thick paper, 
transparencies, labels, envelopes and card stocks
Scanning documents and converting an image into 
text with Readiris OCR software
Scanning from other applications for Microsoft
®
 
Windows
®
 that support TWAIN scanning and WIA 
scanning (Windows XP/Windows Vista
®
, USB 
connection only)
Storing, editing or erasing items in directories using 
your computer
Programming the features using your computer
Sending, receiving fax documents using your 
computer
To use Multi-Function Station on your computer, the 
following are required:
Operating System:
Windows 98/Windows Me/Windows 2000/Windows 
XP/Windows Vista
CPU:
Windows 98/Windows Me/Windows 2000: Pentium
®
 y 
or higher processor
Windows XP: Pentium z or higher processor
Windows Vista: Pentium 4 or higher processor
RAM:
Windows 98/Windows Me: 64 MB (128 MB or more 
recommended)
Windows 2000/Windows XP: 128 MB (256 MB or more 
recommended)
Windows Vista: 512 MB (1,024 MB or more 
recommended)
Other Hardware:
CD-ROM drive
Hard disk drive with at least 150 MB of available space
USB interface
LAN interface (10Base-T/100Base-TX)
Other:
Internet Explorer
®
 5.0 or later
Warning:
L
To assure continued emission limit compliance;
use only shielded USB cable (Example: Hi-
Speed USB 2.0 certified cable).
use only shielded LAN cable (category 5 straight 
cable).
L
To protect the unit, use only shielded USB cable in 
areas where thunderstorms occur.
Note:
L
A USB cable is not supplied. Please purchase a 
shielded Type-A male/Type-B male USB cable.