Epson 500 Benutzerhandbuch

EPSON PhotoPC 500

The number on the control panel indicating pictures

remaining increases to show your camera’s expanded

capacity.
With the expanded memory, you may notice a delay between

the time you press the shutter button and when the camera

beeps. To reduce this delay, press the button down halfway

until you are ready to take the picture, then press it down the

rest of the way.

2. Grasp the cover and pull away.

3. Place the module into the socket, as shown below. Align

the side of the module that has two notches with the

socket end nearest the small black lever. (See the

illustration under “Removing a PhotoSpan Memory

Module” for the location of the lever.)

4. Press down on the module until it snaps into the retaining

clips at the side of the socket. Do not force the module. If

it does not seem to fit, make sure that you have inserted it

correctly.

5. Replace the cover on the camera body. It should snap into

place.

Follow these steps to remove the memory module:

Turn the camera off and remove the memory module cover.
Press the lever on the side of the memory module socket to

raise the module slightly out of the socket.

Grasp the edges of the memory module and work it up and

out of the socket. Be careful not to touch the metal parts of

the module.
Replace the memory module cover.

Digital Camera

10/96

EPSON PhotoPC 500 - 7