Emulex NP02 Benutzerhandbuch
Lan Manager 7-3
Before Installation
We recommend writing down the following parameters from the Setup
Section in Chapter 2. Refer to them during the installation procedure.
Section in Chapter 2. Refer to them during the installation procedure.
Default Server Name: ____ ____ ____ ____ ____ ____ ____ ____ ____
Default Printer Name: ___ ___ ___ ___ ___ ___ ___ ___ ___ _ ___
IP Address: ___ ___ ___-___ ___ ___ -___ ___ ___-___ ___ ___
TCP port _______ (parallel port)
TCP port _______ (parallel port)
TCP port _______ (serial port)
TCP port _______ (serial port)
Telnet port number _______
RCF port number _______
Have the TES & LAN Manager diskette or the CD-ROM ready for
installation.
installation.
Verify Configuration
Check the system configuration before installing Print Manager for TCP/IP
printing.
printing.
TCP/IP Stack
Every server and client must have the TCP/IP stack loaded before the server
or client can send a print job to the printer server.
or client can send a print job to the printer server.
1) Login to the LAN Manager server as admin.
2) Go to the LANMAN directory.
3) Run S
ETUP
.
4) Pull down the C
ONFIGURATION
menu.
5) Select N
ETWORK
D
RIVERS
.
A
TCP/IP entry should be listed. If this entry is not present, refer to
LAN Manager documentation for information on installing and enabling
the TCP/IP protocol stack. When finished, exit
the TCP/IP protocol stack. When finished, exit
SETUP
.