Emulex NP02 User Manual

We recommend writing down the following parameters from the Setup 
Section in Chapter 2.  Refer to them during the installation procedure. 

Default Server Name: ____ ____ ____ ____ ____ ____ ____ ____ ____ 

Default Printer Name: ___ ___ ___ ___ ___ ___ ___ ___ ___ _ ___ 

IP Address: ___ ___ ___-___ ___ ___ -___ ___ ___-___ ___ ___ 

TCP port _______ (parallel port) 

TCP port _______ (parallel port) 

TCP port _______ (serial port)   

TCP port _______ (serial port) 

Telnet port number _______ 

 

RCF port number _______ 

Have the TES & LAN Manager diskette or the CD-ROM ready for 
installation. 

Check the system configuration before installing Print Manager for  TCP/IP 
printing.  

Every server and client must have the TCP/IP stack loaded before the server 
or client can send a print job to the printer server. 

1)  Login to the LAN Manager server as admin. 

2)  Go to the LANMAN directory. 

3)  Run S

ETUP

.  

4)  Pull down the C

ONFIGURATION

 menu. 

5)  Select N

ETWORK 

D

RIVERS

.   

A

 

TCP/IP entry should be listed.  If this entry is not present, refer to 

LAN Manager documentation for information on installing and enabling 
the TCP/IP protocol stack.  When finished, exit 

SETUP

.