Ricoh CL3000e Benutzerhandbuch
User Account Enhance Unit Type B
39
1
DDDD
While holding the handle, pull
out the controller board slowly.
out the controller board slowly.
The User Account Enhance Unit is
to be installed to the position
shown in the illustration.
to be installed to the position
shown in the illustration.
EEEE
Set the User Account Enhance
Unit on the controller board in the
direction shown in the illustra-
tion.
Unit on the controller board in the
direction shown in the illustra-
tion.
Confirm that the User Account En-
hance Unit is firmly connected to
the controller board.
hance Unit is firmly connected to
the controller board.
FFFF
Align the screw hole of the User
Account Enhance Unit and the
controller board, and then fasten
the User Account Enhance Unit
on the controller board using a
supplied screw.
Account Enhance Unit and the
controller board, and then fasten
the User Account Enhance Unit
on the controller board using a
supplied screw.
GGGG
Align the controller board to the
top and bottom rails, and then
push in slowly until it stops.
top and bottom rails, and then
push in slowly until it stops.
Note
❒ When installing other options
on the controller board, do not
close the controller board, but
go to the steps for installing the
option.
close the controller board, but
go to the steps for installing the
option.
Important
❒ The printer may not work prop-
erly if the controller board is not
set properly.
set properly.
ZHBP020E
ZHBP130E
ZHBP140E
ZHBP150E
ZHBP070E
AresPGBOptionSetup-F_FM.book Page 39 Monday, July 29, 2002 1:12 PM