Primera Technology RX900 Benutzerhandbuch

Label Stock

3. Remove any shipping tape from your label stock roll to

ensure that it can unroll freely, making certain that no

adhesive portion is exposed. It is important to note that

any exposed adhesive surface can attach itself the inner

workings of the print mechanism and cause a media jam.

4. Place your roll of label stock on the

Roll Arm

and push it

inward until it touches the

Roll Stop

5. Flip up the Roll Guide and slide it inward until it touches

the label stock. The Roll Guide will automatically pull back

slightly to the correct position. There should be approxi-

mately a 1mm gap between the roll guide and the roll.

Important Note: Be aware that some label stock may have a core that

is slightly too large for the roll or the labels may have wrapped

unevenly causing some to stick out beyond the edge of the core.

Both of these issues can cause feeding problems.

6. Pull the

Movable Throat Guide

outward to make room for

the label stock.

DO NOT PINCH

Roll Guide

Roll Arm

Roll Stop

RX900.qxd 2/17/2011 1:27 PM Page 10

TOC

INDEX