Primera Technology RX900 Benutzerhandbuch

Label Stock

7. Place the leading edge of the label stock under

the "label stock" symbols on the Throat Guides.

The label stock should be placed far enough into the throat

of the printer to correctly position the Movable Throat

Guide but not yet into the printer itself.

8. Slide the Movable Throat Guide inward until it almost

touches the label stock.

Important Note: The label stock should be close enough to the Fixed and

Movable Thoat Guides to provide proper guidance but not close

enough to pinch the label stock. (0-1 mm gap on either side)

If the label stock is pinched by the guides, poor print quality or

feeding problems could result.

9. Feed the label stock further into the printer until it senses

the label and automatically feeds it through the printer. If

the printer fails to feed the label stock, press the

Load/Feed button on the front panel while continuing to

guide the label stock into the printer. If the printer does not

automatically grab and feed the stock or continues to feed

the stock without stopping check the

Stock Sensor position

or mode (Section 2C or 2D).

DO NOT PINCH

Fixed Throat Guide

Movable Throat Guide

Label Stock

RX900.qxd 2/17/2011 1:27 PM Page 11

TOC

INDEX