Primera Technology RX900 Benutzerhandbuch

Ink Cartridge

Color + Black is best for images that have large areas of black

graphics or text. Although you can print these same images

with just the color cartridge, often the blacks will look darker

with this setting.
Color is the default setting and is best for most images. With

this setting the printer only uses the color cartridge to produce

all colors including gray scale black and white images.
Monochrome Black is for images that have large black areas or

black text. This will ensure that no color ink is being used. In

some cases printing JPG files using Color + Black for an image

that is all black will still cause some color ink to be used.
Monochrome Black is not recommended for gray scale images

such as a black and white picture. The ink spits of a black car-

tridge are not as small as the color cartridge. This allows for

faster black printing but at a lower 

dpi

. Using just the black

cartridges for such images may result in a grainy image.

Media Type

  

There are multiple media type options which correspond with

the various types of label stock sold by Primera.  Match this

setting to the media installed in the printer to achieve the clos-

est color match to the screen.  Each of these settings employs a

slightly different color table developed specifically for the

media type listed.  
If the printed output is not matching the color on screen,

regardless of what media you have installed you can adjust

this setting to change the color output.  You can experiment

with this setting and the color matching setting to adjust the

color of the printed image. 

Color Matching

 

Best for Graphics mode is best used for graphical images

where accurate color reproduction is not as essential.  Images

printed in this mode will look more vibrant because more ink

is being used to produce them.  However, printing images of

people may produce skin tones that have a reddish tint. 

RX900.qxd  2/17/2011  1:31 PM  Page 43