Primera Technology RX900 Benutzerhandbuch

Printing

Best for Photos mode is best used for photographic images

where accurate color reproduction is very essential. Images

printed in this mode will look lighter than those printed in

Photo mode. Skin tones especially will look more natural in

this mode.

NOTE: Exact color matching of the printed labels to the screen may never

be possible since there are factors that affect this out of the drivers

control. The surface of the label reacts with the ink in the cartridge to

produce the color. For this reason, when printing the same image to

different types of labels with different surfaces the printed output can

look entirely different.

Ink Saturation

This option controls the amount of ink used when printing an

image. The default setting is 100%, which will provide the

most accurate color matching. If the ink is not drying fast

enough or bleeding, you can decrease the Ink Saturation to

lessen the amount of ink that is applied to the label.

Enable Bi-di Printing

This setting defaults to “Yes” for fastest

bidirectional

printing.

Stock Sensor Mode

Click this setting to open the Status Monitor. See Section 2D

Output Mode

Click this setting to open the Status Monitor. See Section 2E

Print Alignment

Click this setting to open the Status Monitor. See Section 4D

Cartridge Maintenance

Click this setting to Align the Printhead, Clean the Printhead

or Change a Cartridge. This setting opens the Status Monitor.

RX900.qxd 2/17/2011 1:31 PM Page 44

TOC

INDEX