Ricoh LD124c Benutzerhandbuch
Remarks
146
7
Cleaning and Adjusting
Internal Parts
Internal Parts
Perform the following procedure
when missing colours and lines ap-
pear on copies and prints.
when missing colours and lines ap-
pear on copies and prints.
AAAA
Press the
{{{{User Tools/Counter}}}} key
and then [Maintenance].
BBBB
Press [Clean / Adjust].
CCCC
Press [Yes].
Note
❒ Cleaning may take a while.
❒ Do not open the cover or turn
❒ Do not open the cover or turn
off the power while the follow-
ing display is shown and the
machine is cleaning.
ing display is shown and the
machine is cleaning.
DDDD
The display will return to [Mainte-
nance]
nance]
automatically when clean-
ing is finished. Press the
{{{{User
Tools/Counter
}}}} key and exit User
Tools.
Cleaning the Dustproof Glass
The dustproof glass may require
cleaning if white lines appear on the
print side of the document.
cleaning if white lines appear on the
print side of the document.
AAAA
Turn off the power switch.
BBBB
Open the front cover and remove
the cleaning brush.
the cleaning brush.
CCCC
Slide the cleaning brush with the
blue handle in and out, slowly 8
to 10 times.
blue handle in and out, slowly 8
to 10 times.
Important
❒ Do not insert the brush forceful-
ly, or the machine might be
damaged.
damaged.
DDDD
Return the cleaning brush to its
original position.
original position.
EEEE
Close the front cover of the ma-
chine.
chine.
FFFF
Turn on the power switch.
ZGJS707E
ThemisC1_AE_zentai_pre_FM.book Page 146 Thursday, July 28, 2005 2:13 PM