Ricoh AP1400/AP2000 Benutzerhandbuch

Seite von 332
Cleaning the Printer
119
10
R
 
CAUTION:
Type 1 printer
Note
❒ Please refer to the inside of the
front cover of this manual to con-
firm which printer (Type 1 Printer
or Type 2 Printer) you have.
A
Turn the printer's power switch
off.
B
Pull out the plug from the socket.
Remove all the cables from the
printer.
Note
❒ Do not touch the three white
pins on the right front side of
the printer.
C
Pull the paper tray until it stops.
After that, lift it slightly, then pull
it out of the printer.
D
Move the printer to the edge of a
stable table or desk.
Important
❒ Do not put the printer on an un-
stable or tilted surface.
❒ If the optional tray unit is
equipped with your printer, do
not move the printer and the
unit together as they are not se-
curely attached.
❒ When lifting the printer, make
sure that the optional tray unit
is not attached to the printer.
When lifting the printer, use the 
grips on both sides of the printer. 
Otherwise, the printer might fall 
and cause personal injury.
When you move the machine, 
unplug the power cord from the 
wall outlet to avoid a fire or an 
electric shock.
When you pull out the plug from 
the socket, grip the plug to avoid 
damaging the cord and causing a 
fire or an electric shock.
TS3Y270E
TS3M030E