Ricoh AP1400/AP2000 Benutzerhandbuch
Cleaning the Printer
121
10
B
Pull out the plug from the socket.
Remove all the cables from the
printer.
Remove all the cables from the
printer.
C
Pull the paper tray out of the
printer.
printer.
D
Move the printer to the edge of a
stable table or desk.
stable table or desk.
Important
❒ Do not put the printer on an un-
stable or tilted surface.
❒ If the optional tray unit is
equipped with your printer, do
not move the printer and the
optional tray unit together as
they are not securely attached.
not move the printer and the
optional tray unit together as
they are not securely attached.
❒ When lifting the printer, make
sure that the optional tray unit
is not attached to the printer.
is not attached to the printer.
E
Pick the stopper inside the roller
with your fingers (
with your fingers (
A), slide it to
the left, so that the paper feed
roller can be released (
roller can be released (
B).
F
Clean the rubber part of the roller
with a soft damp cloth. After wip-
ing it with a damp cloth, wipe it
with a dry cloth to remove the wa-
ter.
with a soft damp cloth. After wip-
ing it with a damp cloth, wipe it
with a dry cloth to remove the wa-
ter.
Important
❒ Do not use chemical cleaner or
organic solvent such as thinner
or benzene.
or benzene.
G
With the round part of the roller
up (
up (
A), insert the roller into the
shaft until the roller clicks (
B).
H
Move the printer to the place
where it was installed. Insert the
where it was installed. Insert the
TS4Y270E
TS4M030E
1
2
TS3M040E
1
2
TS3M050E