OKI DP-5000 Benutzerhandbuch

2.

Fix the error to continue printing, or terminate
printing. For more information on fixing printer
errors see the rest of this Chapter. 

The 

button is used for a number of func-

tions, depending on the printer status. The functions
during normal printing are described below.

Paper feed

To feed a single sheet, set the paper feed switch to po-
sition “M” while no data is being received from the
computer (i.e. 

 light is on), load one sheet of paper

into the sheet feeder, and then press the 

button.

Paper eject

If paper is already in the printer and no data is being re-
ceived (

 light is on), press the

 button

to eject the paper.

Cancelling an alarm

To cancel an alarm for anything other than a hardware
or mechanism error, press the 

 button after

the removing the cause of the alarm.

Forced printing and clearing data

When the data transfer from the computer stops for
more than about 30 seconds, and the 

 light is

blinking quickly, press the 

button to force

the printer to print the data it has received so far.

Follow these steps to clear a paper jam.

1.

First, press the 

 button to shut off the

power.

2.

Press the front cover release button and gently
open the front cover.

3.

Press down on the release lever (1) and gently
pull out the jammed paper.