OKI DP-5000 Benutzerhandbuch

When problems occur during operation of the printer,
please check the following troubleshooting tips before
returning the printer for repair.

Make sure the power cable is plugged into an out-
let as well as connected to the printer. After
checking the power cable, press the 

 button

to turn on the printer.

After turning on the extension block or power
strip, press the 

  button to turn on the

printer.

To fully take advantage of the features of your
DP-5000 printer, you will need a bi-directional
printer port and a bi-directional printer cable.

With AT compatible computers, most typical
cables will work.

It is possible to use a one-way interface with the
printer if the spooler is set for one-way interfac-
ing.

Windows 95/98 Plug & Play installation and bi-
directional interfacing with the printer are only
possible if your computer supports bi-directional
parallel ports and you are using a bi-directional
cable.

All DOS machines (AT compatibles) can use the
bi-directional communication used with this
printer.

a

Printer errors cannot be detected by the
printer driver.