Manualsbrain.com
  1. Handbücher
  2. Marken
  3. OKI
  4. 9400
  5. Benutzerhandbuch

OKI 9400 Benutzerhandbuch

Download
Seite von 453
 
RAM CHECK 
RAM is being checked as part of the printer's initialization process. 
 
WARMING UP 
The printer is warming up. 
Problem Solving: Macintosh Systems 
Print job is garbled or fails to print 
The time set for the printer to wait for additional data is too short. 
► Press MENU to enter the printer menu and go to SYSTEM CONFIG MENU, then change 
the WAIT TIMEOUT setting to a minimum of 40 seconds. 
Cannot configure after USB connection. 
Interface is disabled. 
► Check that USB interface is set to enable. 
MacOS version incorrect. 
► Use MacOS version 9.0 or higher that supports USB connection. For earlier versions, 
connect printer via a network. 
USB cable does not meet specifications. 
► Switch to a specification Ver.1.1 USB cable. 
Configuration procedure was not correctly followed or cancelled. 
► Configure again from the beginning. 
USB cable is disconnected or faulty. 
► Reconnect or try another cable. 
A USB hub is being used. 
► Connect the printer and computer directly. 
Cannot print. 
Printer is switched off. 
► Turn the printer on. 
USB cable is disconnected or faulty. 
► Reconnect or try another cable. 
A USB hub is being used. 
► Try connecting the printer and computer directly. 
 
 
301