OKI 9400 Benutzerhandbuch

PARALLEL ENABLE 

BI-DIRECTION ENABLE 

ECP ENABLE 

ACK WIDTH 

NARROW 

ACK/BUSY TIMING 

ACK IN BUSY 

I-PRIME DISABLE 

 

To change parallel port menu settings: 

 

 

 

1.  Press MENU repeatedly until PARALLEL MENU appears on the display. 

2.  Press ITEM (+ or -) repeatedly until the parameter you wish to change appears on the 

display (e.g., BI-DIRECTION). 

3.  Press VALUE (+ or -) repeatedly until the setting you wish to engage appears on the 

display (e.g., DISABLE). 

4.  Press SELECT to engage that setting (an Asterisk will appear next to the new setting). 

5.  Press ON LINE to save the setting and exit the menu.  

 

The parallel port supports IEEE-1284 bidirectional mode and ECP mode. If your computer's 
parallel port is not compatible with one of these modes, the printer may not print at all or it may 
print corrupted data.  

To correct for this, enter the printer's Parallel Menu and change the ECP setting to Disable. 

 

To change ECP setting: 

 

 

 

433