MINOLTA PI4700E Benutzerhandbuch
UNIX Configuration
12
Pi4700e
12-43
A
ppe
ndi
x
Chap
ter
12
3
What is the printer name?
Type the printer name and press
.
4
Here, the script displays the information you have input up to this point.
Node name of the Print Server Card: printfast
Node name of the Print Server Card: printfast
Printer name to be used: <printer name>
The printer is attached on: PORT 1
Check these settings and make sure they are correct. If they are cor-
rect, type
rect, type
yes
and press
. Otherwise, type
no
and press
.
5
Is this printer PostScript?
Type
yes
and press
if the printer is a PostScript printer. Other-
wise type
no
and press
.
6
The printcap entries you have made up to this point appear on the dis-
play and the script confirms whether you want the entries written into
the
play and the script confirms whether you want the entries written into
the
/etc/printcap
file. Type
yes
if you want the entries added to print-
cap and then press
. If you do not want them added, type
no
,
press
and then manually make the required changes to the en-
tries.
Do not change the device name in the
Do not change the device name in the
/etc/printcap
file, which was
given to the Network Card in step 3. The lp command line must refer-
ence the
ence the
:lp
entry recorded in the printcap file. The following shows an
example entry.
<printer name> | Print Server Card printer:\
:lp=/dev/<printer name>:\
:if=/usr/nic/infilter:\
:sd=/usr/spool/<printer name>:
* All printcap entries start with a tab except for the first.
7
The script creates a spool directory in
/usr/spool
and starts a daemon
for the newly configured printer. At this time, the script displays the
path you should use if you ever need to restart the daemon.
path you should use if you ever need to restart the daemon.
Example:
/usr/nic/lpr_print /dev/nic/<printer name> print-
/usr/nic/lpr_print /dev/nic/<printer name> print-
fast 10001 &
8
Run the ps command to view all your lpd/lpr processes.
ps -ax | grep lpd
Enter
Enter
Enter
Enter
Enter
Enter
Enter