MINOLTA PI4700E Benutzerhandbuch

UNIX Configuration

Pi4700e

12-45

ppe

ndi

Chap

ter

The printcap entries you have made up to this point appear on the dis-
play and the script confirms whether you want the entries written into
the

/etc/printcap

file. Type

yes

if you want the entries added to print-

cap and then press

. If you do not want them added, type

press

and then manually make the required changes to the en-

tries.

<printer name> | Print Server Card printer:\

:lp=/dev/<printer name>:\

:if=/usr/nic/infilter:\

:sd=/usr/spool/<printer name>:

This completes the installation. In response to the message about
whether you want to install another printer, input

yes

and then

press .

Like all BSD systems, ULTRIX uses the

/etc/printcap

file to configure a

printer. The interface to the installation script is the same for all BSD sys-
tems, but the printcap entry is different.

HP-UX System

Type the following command to run the installation script.
nicinst

The script automatically downloads the appropriate Network Card util-
ities for your system and displays questions to prompt you for the in-
formation it needs.

What is the node name of the Print Server Unit?
Type the host name recorded in

/etc/hosts

. For example, type

print-

fast

and then press

What is the printer name?
Type the printer name and press

Here, the script displays the information you have input up to this point.
Node name of the Print Server Card: printfast

Printer name to be used: <printer name>

The printer is attached on: PORT 1

Check these settings and make sure they are correct. If they are cor-
rect, type

yes

and press

. Otherwise, type

and press

Enter