HP (Hewlett-Packard) LCS60 Benutzerhandbuch
LCS60 Software
Configuration Changes
Note 2:
The addhost and viewhosts commands display only the hosts
configured in the local system database. If DNS is used on your
system the nslookup command can be used to display host
information.
configured in the local system database. If DNS is used on your
system the nslookup command can be used to display host
information.
Administrative and Maintenance Commands
In addition to the commands described in the previous sections, the following
administrative/maintenance commands are also available from the Config direc-
tory. Refer to the chapter listed in Table 3-3 for details of these commands.
administrative/maintenance commands are also available from the Config direc-
tory. Refer to the chapter listed in Table 3-3 for details of these commands.
Table 3-3: Administrative/Maintenance Commands
–
Config Directory
_ ____________________________________________________
Operation Command
Description
_
____________________________________________________
Enable/disable autobaud
console
see Chapter 8
Backup/restore functions
backup
see Chapter 8
Remote upgrade
upgrade
see Chapter 9
_ ____________________________________________________
_ ____________________________________________________
Issue 3
3-29