Zebra Technologies P640i Benutzerhandbuch

76

P640i Card Printer User Guide

980541-001 Rev. A

Make a note of the port designation. If you OK the 
above screen, the Add Printer Wizard will complete 
the installation semi-automatically. 

USB Port: If you selected USB Port, the Browse 
Printers screen displays the USB-connected printers. 
Highlight the printer serial number you are working 
on (even if there is only one listed), then click OK.

Click OK to accept the timeout defaults on the 
Configure USB Port screen.

.Make a note of the port designation. If you OK the 
above screen, the Add Printer Wizard will complete 
the installation semi-automatically, see Step 6 and 
following.

5. On the next screen select the default, Local 

printer, with the “Auto Plug and Play” box 
unchecked, then click Next.

6. “Local printer” is the default selection.Click 

Next.

The P640i is always a Local Printer even if it is 
connected by Ethernet to a network of several 
computers. In such an installation the P640i 
printer driver would be separately installed on each 
of the connected computers, so the P640i would 
not be a network printer as defined by Microsoft

Compatibility Mode should 

be enabled only if the P640i printer is 
connected to the computer’s parallel port 
through a third party “dongle” (a 
hardware security device)

PHID1 is the alias for “Zebra 

Enhanced LPT1”.

From this point on, the 

screens for Parallel and USB are similar, 
the only difference being the port 
description. 

Compatibility Mode should 

be enabled only if the P640i printer is 
connected to the computer’s parallel port 
through a third party “dongle” (a 
hardware security device)