Zebra Technologies 105SL Benutzerhandbuch

58

105SL User Guide

6/4/2004 11342L Rev. 8

Configuration and Calibration LCD Displays

ESSID

2

ESSID
This parameter cannot be changed through the front panel.

AUTH. TYPE

2

Authentication Type
Default: OPEN
Selections: OPEN, SHARED

LEAP MODE

3

An encryption method that is available with some wireless cards. Set the LEAP user 
name and password through the printer web pages.
Accepted Values: ON, OFF
Default Value: OFF

ENCRYPTION 

MODE

2

Encryption Mode
Default: OFF
Selections: OFF, 40-BIT, 128-BIT

ENCRYPTION 

INDEX

2

Encryption Index
Default: 1
Selections: 1, 2, 3, 4

RESET NETWORK

1

Reset Network
This option resets the wireless card and the print server when the wireless option is 
running. Selecting this option has no effect when the wireless option is not running, 
when there is no card inserted, or when the wireless password is anything other than 
the default (zero).

Press the (+) key to select 

YES

.

The LCD prompts 

ARE YOU SURE?

.

• Press the (–) key to select 

NO

 to cancel the request.

• Press the (+) key to select 

YES

 and reset the network.

1  These parameters appear after the system recognizes the existence of a ZebraNet print server (wired or wireless). After the 

print server is recognized, all zeroes (000.000.000.000) will display until the printer obtains an IP address or defaults to 
address 192.168.254.254.

2 Appears only when the ZebraNet Wireless Print Server is installed.
3 This parameter appears 1) when no wireless card is inserted or 2) when the wireless card is associated to the WLAN and the 

card supports LEAP.